Instructions
Things You'll Need:
- Hearing protection
- Safety glasses
- Socket set
- 3/8-inch ratchet
- Expansion bolt extractor
- Hammer drill
- Hand-pressurized water tank
- Clean rags
-
1
Put on your hearing protection and safety glasses.
-
2
Select a socket from the socket set that matches the size of the hex nut tightened to the expansion bolt and place the socket onto the 3/8-inch ratchet.
-
3
Place the socket onto the expansion bolt hex nut and turn the ratchet handle counterclockwise to loosen the hex nut.
-
4
Remove the hex nut from the threads of the expansion bolt.
-
5
Secure the expansion bolt extractor into the chuck of the hammer drill. Refer to the operating manual for the hammer drill to determine the proper procedure for securing the expansion bolt extractor.
-
6
Fill the hand-pressurized water tank with water and pump the handle of the water tank to pressurize the water.
-
7
Slide the expansion bolt extractor over the expansion bolt and press the trigger of the hammer drill to start drilling around the expansion bolt.
-
8
Spray water onto the expansion bolt extractor as you drill around the concrete anchor.
-
9
Pull the hammer drill toward you to remove the expansion bolt extractor from the concrete.
-
10
Remove the loose expansion bolt from the concrete.
-
11
Wipe the area around the expansion bolt with clean rags to clean the surface of the concrete.